| PART |
Description |
Maker |
| S8740240P12 |
GaAs Push Pull Hybrid
|
PDI
|
| DRF1301 |
MOSFET Push-Pull Hybrid
|
Microsemi Corporation
|
| S8740340PT |
GaAs Push Pull Hybrid
|
PDI
|
| RFPP2590 |
GaAs Push Pull Hybrid 45MHz to 1200MHz
|
RF Micro Devices
|
| S10040240P |
GaAs Push Pull Hybrid 40MHz to 1000MHz
|
RF Micro Devices
|
| S10040230GT |
GaAs Push Pull Hybrid 40 - 1000MHz 23.5dB min. Gain @ 1GHz 250mA max. @ 24VDC
|
PREMIER DEVICES, INC.
|
| S8740220GT |
GaAs Push Pull Hybrid 40 - 870MHz 22.7dB min. Gain @ 870MHz 240mA max. @ 24VDC
|
PREMIER DEVICES, INC.
|
| S8740180GT |
GaAs Push Pull Hybrid 40 - 870MHz 18.7dB min. Gain @ 870MHz 240mA max. @ 24VDC
|
PREMIER DEVICES, INC.
|
| S10040280GT |
GaAs Push Pull Hybrid 40 - 1000MHz 28.0dB min. Gain @ 1000MHz 260mA max. @ 24VDC
|
PREMIER DEVICES, INC.
|
| S8740280GT |
GaAs Push Pull Hybrid 40 - 870MHz 28.0dB min. Gain @ 870MHz 260mA max. @ 24VDC
|
PREMIER DEVICES, INC.
|
| DS3687H DS3687J-8/A DS3687N-8/B DS3687H/A DS3687N- |
Dual Peripheral Driver
µP Supervisory, Push/Pull Active-Low, TH: 1.8V, Timeout: 100ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 1.6V, Timeout: 100ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 2.3V, Timeout: 20ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 2.0V, Timeout: 100ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 1.8V, Timeout: 100ms, SOT23 3-pin 双外围驱动器
|
KEMET Corporation
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
|
